Suitable for pitched roofs, the FS Skylight is the perfect solution for creating light filled rooms where added ventilation is not necessary. Energy efficient glazing and the use of blinds ensure heat transference is minimised.

Benefits Here:

 

  • Available in 11 sizes
  • Complete with flashings for tile roofs.
  • Outer aluminium cappings (grey).
  • White painted interior wood frame and sash.
  • Approx 75% Heat Block.
 

PRODUCT OPTIONS

Select your product options first

* Note: build to order products are non returnable.
Only %1 left
Price: From $470.00
Product Code:
Velux FS Fixed Skylight

The FS Fixed Skylight is perfect for visually expanding areas such as hallways, stairwells, and other closed-in, dark spaces that can be transformed with Daylight and sky views. It provides an economical alternative for creating a spacious home that is filled with abundant daylight.

 

Product features:

  • White painted interior wood frame and sash.
  • Outer aluminium cappings (grey).
  • Smooth, low profile sits lower in the roof, does not obstruct the roofline.
  • High Performance double glazing as standard; with NEAT™ coating to reduce cleaning frequency.
  • Complete with flashings for corrugated iron or tile roofs.
  • Available in 11 sizes
  • Approx 75% Heat Block.
U-Value † solar heat gain co-efficient † Bushfire^ wers max 5 stars (summer rating) Australian standards
Skylight 2.90= Glass only 193 Skylight 0.24 Glass only 0.28 BAL40 ★★★★★ AS4285#, AS1288 AS3959, AS1530.8.1*

NB: For roofs below 15° pitch, FS needs to be raised to 15° and custom flashed. VELUX can assist with technical advise and drawings (build-up not recommended in bushfire areas). *AS1288 and hailstone test applicable to 2004 glazing variant only. †U-value (W/m²K) and SHGC data based on AFRC simulations for 2004 glazing, (FS complete skylight: size 1140mm x 1180mm). ^2004 Glazing skylight only. Custom-made flashing required. Roof pitch 18°-75°. ‡2004 Glazing variant only.


ASSEMBLY & PACKING TIME

1 - 5 Working Days


Downloadable Forms

FS Brochure

FS Data Sheet

Certification

 

Wood maintenance
 
Although most of our products are now pre-painted, some still maintain a natural wood finish. The timber has received basic treatment and finished coating at the factory and can be cleaned with ordinary household cleaners. It must receive further treatment at least every four years and whenever required. Windows exposed to strong heat, strong sunlight and/or an especially high level of humidity (e.g. in a kitchen or bathroom) must however receive treatment at least every two years.


Surface maintenance: Remove surface treatment (varnish or paint). Ensure surface is clean and dry and apply primer to the timber. When dry, apply a coat of water-based acrylic varnish/paint (always follow the manufacturer's directions). Apply the same method to the affected areas if the varnish/paint is damaged. 


When you treat the wood, it is important to cover the gaskets to prevent varnish/paint rubbing off on the gaskets, as this will make the gaskets stiff/hard and spoil their effect.

Cleaning the pane

Clean the pane with a soft, clean, lint-free cloth/chamois leather/nonabrasive sponge or a clean, non-metal window squeegee. Clean water will normally be sufficient for cleaning the pane. Ordinary, non-abrasive household cleaners can also be used. Soft water is best for cleaning panes. Therefore, in hard-water areas add a small amount of detergent to soften the water or wipe off all excess water after cleaning.

  • Avoid contact from silicone with the pane 
  • Do not use any cleaning products containing abrasive particles 
  • Do not use chemical products for cleaning the pane 
  • Avoid contact with the pane from all sharp or abrasive objects including jewellery 
  • Never attempt to clean off dirt on the pane without first applying water 
  • If any works are taking place in the vicinity of the pane, protect the pane with a clean plastic sheet to prevent any splashes or staining from aggressive and abrasive compounds 

Cleaning the flashing

Leaves and other debris should be re moved from the flashing around the window once per year to allow rain water to flow freely.

Condensation

When condensation forms on the glazing of your windows, you should take it as a warning sign that you should ventilate more often. Regular ventilation is the most efficient way of preventing condensation water from forming on your window glazing. 

Limit the amount of humidity:

  • If possible, do not dry your laundry inside the house. 
  • Close the doors of kitchens and bathrooms. 
  • Ventilate regularly for five minutes at least three or four times a day
  • If possible, maintain a constant room temperature of at least 68°F.

Snow and ice
 
In areas with prolonged cold periods with heavy snowfall, considerable amounts of snow and ice may accumulate on the roof and a VELUX roof window could become covered with snow and ice for long periods.

When the temperature rises, the window will often be one of the first places where the snow and ice starts melting.

It is important to make sure that water can always drain off from the roof and surrounding gutters.

Specifications

Made for Australia

We've tested our products to ensure they meet the harsh demands of the Australian climate

Double Glazing

All VELUX skylights and roof windows use double glazing as standard

Blinds

Solar Powered blockout blinds available for when you need to control the light