Sunpipe Blaze
The Skyspan Sunpipe Blaze range of skylights is a Tubular Skylight kit that uses flat glass in the place of the standard Plastic dome to meet the requirements for Bushfire zones. Sunpipe Blaze is rated up to BAL 29 (Bushfire Attack Level). The Sunpipe is a Tubular Skylight that uses a mirror like Sun Ray attractor that transfers sunlight down a highly reflective flexible shaft to a ceiling trim and diffuser at the ceiling level.
Technical Information
Description
The Skyspan Sunpipe Blaze tubelight range of skylights is one of the most extensive in Australia. The Skyspan Sunpipe Blaze skylights is a cost effective ways of Utilizing Nature’s Gift and providing natural light to almost any room – even in Bushfire zones . The Skyspan Sunpipe tubelight can be supplied to suit any roof profile and has the option of powdercoating to complement the Colorbond range of colours.
The highly reflective flexible shaft carries natural light directly to your room providing an atmosphere of freshness and vitality.
The Skyspan Sunpipe Blaze tubelight is completed by a white ceiling trim and a selection of diffusers.
The Skyspan Sunpipe Blaze tubelight is an extremely easy unit to install. The flexible shaft eliminates the need for a costly light shaft construction, saving both time and money.
If the Sunpipe Blaze is located in Bushfire Areas rated BAL 29 and the roof pitch is below 18 degrees, the Sunpipe Blaze is fitted with an Ember Guard made up of Stainless Steel mesh to prevent ember penetration in the case of a bushfire.
The Skyspan skylight is manufactured to comply with the Australia Standard’s AS4285 & AS1288 and is covered by a seven (7) year guarantee.
With the available option for an ember guard in BAL 29 areas which are at serious risk of catching on fire due to burning debris and increased heat flux especially during a bushfire. According to AS3959–2009, Ember Guards are designed to reduce your home’s risk of ignition from a bushfire. for more information visit Construction of Buildings in Bushfire-Prone Areas.
Technical Drawings
Drawings coming soon!
Maintenance & Repair
Skylights should be inspected at least once per year and any build-up of leaves and rubbish be removed from around the skylight. Depending on the severity of the problem, this may be needed to be performed more often. The Diffuser should be cleaned as needed using a wet sponge.
The Skyspan skylight is normally cleaned by the elements. At least once per year, wipe over with soap and water and a nonabrasive sponge. Avoid using solvents and thinners. Dust and wipe over to ensure that any build up or caked dust is removed which could prematurely cause corrosion. Repeat as often as needed for each individual location.
Basic Common Sizes
300mm, 400mm 500mm Diameter
Installation Instructions
Assembly & Packing Time
5 - 10 working days